14
parking on a grade is unavoidable, be
sure to block the wheel.
Put the forks on the ground or floor
and tilt a little forwards. Shut down the
engine and remove the key.
11. Operate the controls smoothly-don’t
jerk the steering wheel. Avoid sudden
stops, starts or turns.
12. Control speed and observe traffic
signs.
When traveling on public roads or
streets, obey all local traffic regulations
13. Pay attention to the route of the
truck , be sure to make a wide sight.
14. Never allow other person(s) to ride
14.Does not allow other people sitting
on the forks, pallets or on the truck.
15. Before driving over a dock-board
or bridge-plate, be sure that it is properly
secured and strong enough to sustain the
weigh. Check the ground or floor
condition of working area in advance.
16.
Keep your mind on your work.
17. Keep your head, hands, arms, feet
and legs within the cab. Never let them
out of cab for any reason.
18. When handling bulky loads, which
restrict your vision, operate the truck in
reverse or have a guide.
19. Slow down and sound horn at
cross aisles and other locations where
vision is restricted. The speed should be
keep slower than 1/3 of max speed.
20. Keep fluid cans, row cotton, paper
or chemicals away from the truck during
operation since there is a danger of their
firing or exploding due to exhaust gas
from the muffler.
