8
SPN:3701 FMI:15
At the end of parking regen, the light will
automatically turn off; the engine can be shut
down after waiting for 2
-
3min until the engine
restores to normal idling.
In the third case
, service regen.
H7/ H8
diesel
engine
Flash
Fault code
SPN:50261 FMI:15
W97,
W98,
W99
Diesel
engine
Flash
Fault code
SPN:3701 FMI:16
When the DPF has been severely blocked, the
engine has reduced power and torque, and the
forklift truck does not work normally, aftersales
staff should be contacted for service regen.
Exhaust system fault indicator light
If the EATS has a fault or exceeds the
designated operating parameters, the engine
fault light should turn on at the same time.
Inhibit indicator light
When the light turns on, it indicates that the
regen status of the engine is restricted and
driving regen or parking regen is inhibited.
Caution
When working in an environment that is not
suitable for DPF regeneration, turn on the
inhibit mode. After leaving, release the inhibit
mode promptly so that active regeneration
can continue.
Warning
If the active regen has been inhibited, the
exhaust filter and exhaust will become
blocked and the working performance of the
forklift truck will be degraded until the engine
fault indicator light is activated.
High exhaust temperature indicator light
Caution
Light on: Reminds the driver that the regen
process causes high exhaust temperature and
to pay attention to safety.
Summary of Contents for XF Series
Page 62: ...59 WG3800 and LPG Fuel System Diagram...
Page 72: ...Notes...
