15
functions are added.
Accelerator pedal [10]
When the accelerator pedal is pressed, the
engine speed and the truck speed will increase;
when the accelerator pedal is released the
engine speed and the truck speed will
decrease.
Brake pedal [11]
When the brake pedal is pressed the truck
slows down; when the brake pedal is pressed
to the bottom, the truck stops. When the pedal
is released the truck runs freely.
Caution
Avoid emergency braking. Emergency braking
can easily cause the truck to tilt or cargo to fall,
resulting in accidents.
Inching pedal [12]
When the pedal is pressed, the oil pressure of
the hydraulic clutch will drop. When the pedal
is pressed harder, the forklift truck will be
braked. The pedal can be used when the
forklift truck slows down to approach cargo or
conducts loading and unloading operations.
Caution
Do not use the inching pedal excessively. If the
pedal is used as a footrest or used for a long
time, it may cause overheating of the
automatic transmission oil or clutch slip.
Hand brake lever [13]
Pull the lever back to engage and push the
lever forward to release. Engage the lever
before the leaving the forklift truck.
Caution
In case of brake system failure or emergency,
the lever can be engaged for emergency
braking. Do not use the hand brake to slow
down during normal use.
Adjusting lever for steering wheel tilt angle [14]
The position of the steering wheel can be
adjusted. To perform adjustment, pull the
adjusting lever installed on the left side of the
steering hub column, move the steering wheel
to the desired position, and push down the
11
12
14
Summary of Contents for XF Series
Page 62: ...59 WG3800 and LPG Fuel System Diagram...
Page 72: ...Notes...
