50
Caution
1. Drive the truck for at least several kilometers with gasoline every two weeks to prevent the
gasoline from degrading.
2. Do not change the fuel used immediately after the engine is started; the engine should be at
normal working temperature before changing the fuel.
Pay special attention to the following points when the forklift truck is running on LPG:
Check whether there is a gas leak in the LPG steel cylinder and pipelines before driving.
Shut down the engine using the following methods after LPG is used:
① Rotate the fuel changeover switch to neutral.
② Let the engine idle until it stops.
③ Ensure that all of the remaining LPG has been used up. Rotate the ignition key switch to “off”
after the engine stops.
3. The outlet stop valve of the steel cylinder should be fully closed; the engine should be checked
for air leakage after use if it is going to be stored for a long time.
4. If air leakage, faults or other abnormalities are found during operation, the outlet stop valve of
the steel cylinder should be closed immediately and professional maintenance personnel should
be sent to check the LPG system.
Summary of Contents for XF Series
Page 62: ...59 WG3800 and LPG Fuel System Diagram...
Page 72: ...Notes...
