13
Reversing lever [17]
It‘s installed on the left of the steering column.
These series forklift trucks are electronic
reversing, push or pull this lever to realize the
following functions
：
1.5~3.5t
F
Forward
N
Neutral
R
Reverse
4.0~X5.5t
F2
Forward 2 gear
F1
Forward 1 gear
N
Neutral
R
Reverse
1.5~3.5t
4.0~X5.5t
Before changing travelling direction, step the
brake pedal until the truck completely stops,
then move the lever forward to F1, and move
to F2 through F1; if retreat needed, step the
brake pedal to slow down the truck, move
backward to R1, and then move to R2
through R1.
Caution
Only place the lever in neutral can you
start the engine
Engine malfunction detect switch
（
Only for
CUMMINS engine
）
2.0t-3.5t
：
W43
4.0t-X5.5t
：
W58
Fn
Engine detect page turning switch
（
Only
for CUMMINS engine
）
2.0t-3.5t
：
W43
4.0t-X5.5t
：
W58
When the engine has something wrong, put
the Key Switch at the position
┃ （
ON
）
,
―Engine detect‖switch at ―Fn‖ or ―ON‖,
Indicator is always on,
or
Indicator
display fault code by various frequency,
remove the trouble according to fault code.If
there are multi-malfunction,you can watch
other malfunctions by using ―Engine detect
page turning‖.After remove the malfunctions,
,
or
indicator go out.Put
―Engine detect‖switch at ―OFF‖,Key switch
o
（
OFF
）
, start the engine only after
30seconds can.
