17
3.
Body and other parts
Load
-
backrest
The load
-
backrest ensures the stable loading of
cargos. The forklift truck must not be operated
without a load
-
backrest.
Driver's seat
1. Driver's seat weight adjusting handle
2. Forward and backward adjusting handle for
the driver's seat
3. Backrest angle adjusting handle
4. Handrail adjusting knob
· Driver's seat weight adjustment
According to the user’s weight, the weight
adjusting lever can be lifted up and moved
horizontally until the user gets comfortable.
· Forward and backward adjustment of the
driver's seat
Pull the adjustment handle inward by hand,
then push the whole seat forward and
backward to reach the desired position, the
handle is automatically locked when lowered
· Backrest angle adjusting
While sitting on the driver's seat, lean back on
the backrest, pull the backrest angle adjusting
lever upward with your left hand, lean forward
or backward, and release the lever until the
backrest angle reaches the desired position.
·Handrail adjusting
The handrail tilt angle can be adjusted by
rotating the adjusting knob. When rotating the
knob outward, the front end of the handrail
will lift. When rotating the knob inward, the
front end of the handrail will lower.
Warning
⚫
The ignition key switch must be
turned off before adjusting the driver's
seat.
⚫
The seat position can be adjusted
when the forklift truck has stopped.
⚫
Do not adjust the driver's seat
when driving to avoid an accident.
⚫
For front and rear adjustment and
backrest angle adjustment, the handle
should be pulled in place to ensure that
the structure is completely disengaged
before adjustment.
⚫
After adjustment, the levers should
return to the locked position. Ensure that
all the components are locked securely
before using the forklift truck.
Safety belt
·Fasten the safety belt
An auxiliary action is required before pulling
out the safety belt which may require some
familiarization.
One type of seat: You need to press the white
round button (with the text "press to release")
with one hand, and then the seat belt can be
pulled out with the other hand. Then, the belt
can be inserted into the socket on the other
side of the driver's seat.
You may also encounter another kind of
driver's seat: The driver's seat with a rotating
safety belt box. When the safety belt box is
rotated forward, the safety belt cannot be
pulled out; when the box is rotated backward,
the safety belt can be pulled out and inserted
into the socket on the other side of the driver's
seat; the safety belt box must be rotated
forward again to return to the normal working
position.
Your back and waist should be as close to the
driver's seat as possible when fastening the
safety belt. Do not fasten the safety belt at the
abdomen.
Do not tilt the backrest too much; otherwise,
the safety belt will not be extended correctly.
Do not knot or twist the belt.
1
2
3
4
Summary of Contents for XF Series
Page 62: ...59 WG3800 and LPG Fuel System Diagram...
Page 72: ...Notes...
