Remote Controller
User's Manual
HCT-2216/HCR-2216
8. MAINTENANCE
NOTICE
- Checkup Every Functions One by One.
- Replace the Worn Parts of the Transmitter and the Receiver Regularly.
- Take Checkup Spare Parts Regularly.
- If Replacing any Parts, Turn Off the Power.
- Keep the Antistatic Bag the PCB of the Transmitter and the Receiver.
8-1. Weekly Maintenance
1. Check abrasion and operating condition of each Button Switches.
2. Operating condition of EMS (Emergency Stop Switch) Button.
3. Check any external abrasion of the transmitter.
4. Charging state of the batteries.
5 Checking life cycle of the batteries
5. Checking life cycle of the batteries.
6. Contacting state of batteries.
8-2. Monthly Maintenance
Monthly Maintenance of the transmitter
1.Every Connectors state of every units.
2. Check foreign material or dust inside the transmitter
3 Broken state of the dust proof transmitter cover
3. Broken state of the dust proof transmitter cover.
4. State of the battery case
8-3. Monthly Maintenance of the receiver
1. Every Connectors state of every units.
2. Check foreign material or dust inside the receiver.
3. Joint state of the clamp screw of the receiver.
4 State of the output relay and the fuse
4. State of the output relay and the fuse.
5. Joint state of the output terminal board.
6. Joint state of the IC terminal pins.
7. Contact state of antenna
8. Operation state of each operation lamp.
9. The fixing state of all fixed dip switches.
Hangil Control Co., Ltd
11
2008-09-24
