Functions
PROFIL 25:
Addition, Split, Lap, Uhrzeit, Memory recall
STOPSTAR 2:
Addition, Split
Buttons
PROFIL 25:
4: Start/Stop, Split/Lap, Memory/Display, Mode
STOPSTAR 2:
2: Start/Stop, Split/Reset
Inserting and changing battery
Remove the battery cover by pressure
on the bar located on the bottom of the
case (see illustration).
Place battery with the correct polarity.
Snap the cover back in place.
Installing lanyard and protection pouch:
Remove the battery cover. Insert the lanyard from the outer side of
the case through one of the two holes and pass through the other
hole from the inner side of the case. Pull the both lanyard ends from
inside through the two holes of the protection pouch and then tie them
together.
SPLIT
5 MEMORIES
START/
STOP
SPLIT/LAP
DISPLAY
MEMORY
MODE
TIME SET
RESET
stop
start
reset
split
1/100
h
min
sec
PROFIL 25
STOPSTAR 2