Quick Guide
Component R12 / R6
Cat. No. : CP-R12 / CP-R6
Setting Temperature
Setting temperature
-10 to 40℃ (R12) / -20 to 40℃ (R6)
Setting temp. limit
Lid Open
Stop
Start
Max. RPM :
4,800 rpm
Max. RCF :
7,470 xg
Max. RPM :
5,000 rpm
Max. RCF :
7,261 xg
Component
R12
Component
R6
Serial No.
Installation Date
Display Screen
Status of RPM /
RCF / Time /
Temperature /
Rotor ID / ACC /
DEC / Program
Setting Speed
Press once : Setting RPM
Press twice : Setting RCF
Setting Time
Up to < 100 hr
Continuous run (00:00)
View Settings
Verifying the setting
parameters during
centrifugation
Program Save / Call
Saving a program
(up to 100)
Calling up a program
Setting the Rotor ID manually
Enter the rotor ID. manually, when
rotor id is not identified automatically
Setting ACC / DEC Rate
ACC (0 ~ 9 steps, Max.9)
DEC (0 ~ 9 steps, Natural DEC.0)
Display & Control Panel
Saving / Calling Up
a Program
Setting Run Parameters
(RPM / RCF / Time /
Temperature / ACC / DEC)
Temperature range that
stops operation when the
temperature is lower or
higher than the set
temperature.
Setting Temp. Limit
Press a parameter
to be changed
Enter the desired values
on the keypad
Press the
Enter button
Press the
Enter button
Enter the desired
program number on the keypad
Press the
Save or call button
Press the
Temp. limit button
Press the
Enter button
Enter the desired temperature
range on the keypad
