USER MANUAL
│
J1250
W
eight
Nozzle hole
④
Bring the weight to the
center of the nozzle hole of
the drag body at the bottom of
the device.
⑤
Wind the upper balancing cap
thread around the Drive Motor Cover
Bolt and fix it.
Drive
Motor
Cover Bolt
⑥
Adjust the height of the balancing foot so that the vertex of the weight is located at the center
of the nozzle hole.
Nozzle hole
Base
Balancing foot
D
rag body
Assembly
⑦
After completing the adjustment of
the balancing feet, fasten 2 nuts to
the lower part of the H-beam both
top and bottom.
Nut
HANIL Scientific Inc.
│
ihanil.com
│
Service: +82-2-3452-8966 / techsupport@ihanil.com
22