Contents
MODEL NUMBER CONFIGURATION ..................... 1
1.0 INSTALLATION ............................................... 2
2.0 OPERATION .................................................. 5
3.0 MAINTENANCE ............................................. 6
DIMENSIONS AND WEIGHTS ........................................ 8
WARRANTY ......................................................... 9
General Safety Information
1. Pressurized devices
• Do not exceed maximum operating pressure
indicated on serial number tag.
• Make certain filter is fully depressurized before
servicing.
2. Breathing Air
• Air treated by this equipment may not be suit
-
able for breathing without further purification.
Refer to OSHA standard 1910.134 for breathing
air requirements.
3. Flammable gases
The materials of construction used in this product
are compatible physically with flammable gases,
however, there are application limitations for this
product when used with flammable gases. Each
application (other than air or inert gas) should be
carefully reviewed to minimize the chances of
creating a fire or explosion hazard.
IMPORTANT
Tighten cartridges before use. Cartridges may
have loosened during transit. To ensure a tight
seal between the cartridge end cap(s) and inlet
manifold, open vessel and turn cartridge clockwise
(as seen from bottom) until hand tight. See
Section 3.0, B for instructions on entering vessel.
