28
MOVING INTO THE TRANSPORT POSITION
Select ‘ROTOR OFF’ and wait until the
rotor has stopped turning.
Ensure that the
‘lift’
and
‘angle float’
are switched
off.
Select ‘SLEW’ mode on the
control assembly.
Operate ‘SLEW IN’.
Operate ‘LIFT’ and ‘REACH’
to position the machine
(see diagram).
Operate ‘REACH IN’ until the dipper arm
contacts the transport cradle.
Select ‘LIFT UP’ and raise the arms until the
tension link is 300mm from the tractor cab.
Operate ‘ANGLE’ and position the flail
head in as compact position as possible.
(see transport position)
Fully screw in the lift ram and slew ram taps.
