16
The
HI 88713
bench-top Turbidity meter has a unique Tutorial Mode that provides additional
information to help the unexperienced user during the measurements. The instrument displays a screen,
with explanations and confirmation button, when a preparation or other operation has to be performed
by the operator. The instrument resumes the measuring sequence when the operator confirms that the
requested operation was done.
To disable this mode, when in the main screen,
press the
SETUP
key to enter the setup, and then
press
DOWN
key until the “Tutorial” line is
highlighted. Press the “
Disable
” key then press
ESC
to return to the main screen.
R A N G E S E L E C T I O N
R A N G E S E L E C T I O N
R A N G E S E L E C T I O N
R A N G E S E L E C T I O N
R A N G E S E L E C T I O N
The
HI 88713
bench-top Turbidity meter has four
measuring modes: FNU, FAU, NTU Ratio and NTU
Non Ratio. When the instrument is in the main
screen, the selected mode is displayed in the right
side of the LCD, on the message line.
To change the mode, press the
RANGE
key.
When the display shows the Change mode screen,
use the
UP
or
DOWN
key to select a new mode .
Press “
CFM
” key to select the new mode. The
instrument returns to the main screen.
T U T O R I A L M O D E
T U T O R I A L M O D E
T U T O R I A L M O D E
T U T O R I A L M O D E
T U T O R I A L M O D E
