24
MEASUREMENT MODE
Two active soft keys are found at the bottom of the status screen.
• Press
Measure
to access the measurement mode.
• Press
Param
to access the “Select Parameter” menu.
(This screen can also be accessed from the main menu, see
Chapter 6
for a detailed description.).
• Press the
DOWN
arrow to view additional information about the probe.
Measurement mode is one of the three main operating modes of
HI9819X
(along with logging mode
and setup mode). During measurement mode
HI9819X
will simultaneously measure data for
all enabled parameters.
• Use the numbers on the keyboard to select the number of parameters that are shown on the screen
at one time. The display will automatically resize the font.
• Press the / keys to scroll through the enabled parameters if they do not fit on one screen.
Notes: A flashing measurement value indicates that the measurement is out of range.
A flashing measurement unit indicates that the user calibration has not been done and is
needed for accurate readings.
• Press
Log
to enter the log menu. See
Chapter 11
for details.
• Press
Menu
to enter the main setup menu. The main menu accesses the parameter setup,
calibration, system setup and status options. See the following chapters for details.
Summary of Contents for HI98194
Page 9: ...9 SENSOR AND PROBE INSTALLATION ...
Page 25: ...25 SETUP MENU STRUCTURE ...
