43
Date
The date and date format are set in this function.
Press
Modify
and set the date using the keypad.
Press
Accept
to save the date.
Press
Format
to change between the available date formats:
DD/MM/YYYY, MM/DD/YYYY, YYYY/MM/DD, YYYY‑MM‑DD,
MM‑DD‑YYYY, and DD‑MM‑YYYY.
The default format is YYYY/MM/DD.
Auto Poweroff
The Auto Poweroff function is used to save battery life. After the set
time is elapsed, the meter will:
1. Automatically switch off, if in normal measurement mode. Press
On/Off
to switch on again.
2. Enter a sleeping mode, if the continuous logging mode is
selected with a logging interval of at least 30 seconds. The “Auto Poweroff” message and the
Wake up
softkey appear on the LCD; logging is not stopped. Press
Wake up
to reactivate the
display.
Available options are: Not used (disabled), 5, 10, 15, 20, 30 or 60 minutes.
Press
Modify
to select the desired time interval.
The default value is “not used”.
Key Beep
If enabled, an acoustic signal sounds every time a key is pressed. A
checked box indicates this function has been enabled.
The default
setting is disabled.
METER SETUP
Summary of Contents for HI98194
Page 9: ...9 SENSOR AND PROBE INSTALLATION ...
Page 25: ...25 SETUP MENU STRUCTURE ...
