51
One Sample On Meter
Use this option to log one set of enabled measurement parameters to the meter memory.
• If there are no lots saved on the meter, press
New
to create
a new lot. Use the keypad to enter the desired lot name and
press
Accept
to confirm. Press
OK
to log the sample in the
selected lot.
• If there are existing lots on the meter, the meter will suggest
a lot to store the sample. Press
OK
to use the selected lot or
Options
to select a different lot. This will add the new sample
data to an existing lot. A new lot can also be created by pressing
New
. Press
OK
to log the sample in the selected lot.
• On the “Remarks” window, select
Yes
to go to the Remarks
screen. Press
No
to skip this option.
If
Yes
is selected, select a remark from the list, or press New to
create a new remark.
• To return to the measurement screen, press
ESC
.
Continuous Meter Log
• Select “Start meter log” to log the currently enabled parameters
at the set logging interval on the meter.
• To set the logging interval, highlight “Start meter log” and
press
Options
. The log interval time
can set from 1 second to 3 hours. Press
Modify
and use
the / keys and keypad to enter the desired log interval.
Press
Accept
to confirm.
• Press
Select
to edit the lot, remark or tag.
• To stop the meter log, enter the log menu and select
“Stop meter log”.
LOGGING ON METER
Summary of Contents for HI98194
Page 9: ...9 SENSOR AND PROBE INSTALLATION ...
Page 25: ...25 SETUP MENU STRUCTURE ...
