30
31
To set the Reading Mode:
• Press
while in
pH Measure
mode.
• Press
.
• Use
or
to select the Reading Mode option.
• Press
/
to select Direct / AutoHold option as
desired.
• Press
to cancel operation.
Log
Note:
See
Logging
section for available types of logging.
This option allows the user to edit the log settings: Logging Type, Logging Data Configuration, Sampling Period
and New Lot.
Logging Type
Three logging types are available: Automatic, Manual and Auto Hold.
Automatic
- the measurement data is logged automatically at constant time intervals;
Manual
- a snapshot of the displayed measurement data is logged with time stamp when the user manually
depresses Log;
Auto Hold
- this is configured along with the Direct/AutoHold Reading Mode to take a snapshot of stable
measurement data. Press
to initiate a logging session. Press
to initiate an Auto Hold event. The
log occurs automatically once measurement stability is reached. This type log removes subjective data, as it only
captures stable measurements.
To set the Logging Type:
• Press
while in
pH Measure
mode.
• Press
.
• Use
or
to select the Log option.
• Press
and use
or
to highlight the
Logging Type option.
• Press
and use
or
to highlight the
desired option.
• Press
to confirm your selection or press
to
cancel operation.
Logging Data Configuration
This option allows the user to select which parameters will
accompany a log File:
Date/Time, Calibration Data, Sample ID,
Instrument ID, Operator ID, Company Name, Additional Info 1 and
Additional Info 2.
To set the Logging Data Configuration:
• Press
while in
pH Measure
mode.
• Press
.
• Use
or
to select the Log option.
• Press
and use
or
to highlight the
Logging Data Configuration option.
• Press
and use
or
to highlight the desired parameter to be logged in file.
• Press
to enable the parameter or
to disable it.
• Press
to return to previous menu.
Sampling Period
This option allows the user to select the desired sampling period for
automatic logging type.
To set the Sampling Period:
• Press
while in
pH Measure
mode.
• Press
.
• Use
or
to select the Log option.
• Press
and use
or
to highlight the
Sampling Period option.
• Press
and use
or
to select the desired
option.
• Press
to confirm your selection or press
to cancel operation.
New Lot
This option is used to create a new lot when manual logging is used.
Note
: If New Lot option is accessed and the Logging Type is Automatic, a warning message appears on the LCD
informing the user that a new lot can be created only if the Logging Type is set as Manual.
w
w
w
.
.c
om
in
fo
rm
at
io
n@
itm
.c
om
1.
80
0.
56
1.
81
87
