Hanna HI 5522 Instruction Manual Download

Page: 3 / 58

GENERAL DESCRIPTION

HI 5521

and

HI 5522

are professional bench meters with color graphic LCD for pH, ORP (Oxidation Reduction

Potential), ISE (

HI 5522

only), conductivity, resistivity, TDS, salinity and temperature measurements.

The display can be configured as a single channel or dual channel display in various modes: Basic information
only, GLP information, Graph and Log History mode.
The main features of the instruments are:
• Two input channels: one for potentiometric sensors, the other for electrolytic conductivity;
• Capacitive touch keypad;
• Eight measurement parameters: pH, mV, ISE (

HI 5522

only), conductivity, resistivity, TDS, salinity and

temperature;

• Dedicated Help key with contextual message;
• Manual selection, automatic and semiautomatic pH calibration in up to five points, with standard (1.68,

3.00, 4.01, 6.86, 7.01, 9.18, 10.01 and 12.45) and custom buffers (up to five custom buffers);

• Manual Selection and Custom Standard ISE calibration in up to five points, with standard (up to seven standard

solutions for each measurement unit) and custom solutions (up to five custom solutions), with or without
temperature compensation (

HI 5522

only);

• Application for water for injection follows the USP <645> protocol;
• Conductivity probe automatic recognition;
• Automatic or custom standard conductivity calibration in up to four points, probe offset calibration;
• Single point salinity calibration (Percent Scale only);
• AutoHold feature to freeze first stable reading on the LCD;
• Two selectable alarm limits (for pH, mV, ISE, conductivity, resistivity, TDS, salinity);
• Three selectable logging modes: Automatic, Manual, AutoHold logging;
• Continuous Lot logging directly on meter, with selectable log interval: Store up to 100,000 total data points;
• Up to 100 logging lots for automatic or manual modes and up to 200 USP reports, up to 100 ISE methods

reports;

• Selectable sampling period feature for automatic logging;
• Basic Measurement can be viewed with detailed GLP information, or with a Graph or a Log History (while

continuously logging);

• Online and offline graph;
• Large color backlight graphic LCD (240 x 320 pixels) with user selectable color palette;
• PC interface via USB; download logged data to PC or use for Real time logging (

HI 92000

PC application

required);

• Profile feature: store up to five different user setup on each channel.

Remove the instrument from the packing material and examine it carefully to make sure that no damage has
occurred during shipping. If there is any damage, notify your Dealer or the nearest Hanna Customer Service
Center.
The meters are supplied complete with:

•

HI 1131B

Glass-body Combination pH Electrode

•

HI 76312

Four-ring Conductivity Probe with built-in temperature sensor and ID

•

HI 7662-W

Temperature probe

•

pH 4.01, pH 7.01

pH 10.01

Buffer solutions

•

HI 700601

Cleaning solution

•

HI 7082S

Electrolyte solution

•

HI 76404W

Electrode Holder

• One capillary dropper pipette
• 12 Vdc Power Adapter
• Instruction Manual

HI 5521-01

and

HI 5522-01

are supplied with 12 Vdc/115 Vac adapter.

HI 5521-02

and

HI 5522-02

are supplied with 12 Vdc/230 Vac adapter.

Note:

Save all packing material until you are sure that the instrument works properly. Any defective item
must be returned in the original packing with the supplied accessories.

PRELIMINARY EXAMINATION