14
15
SYSTEM SETUP
Log History
The measurement, along with
LOG History
, will be visible when this option is selected:
1) The last stored logged data (Not actively logging) or
2) The last data logged from an active logging lot or
3) An empty display - NO LOTS saved, Not currently logging
The log history list also contains the main measured value, the appropriate mV, the temperature, the
temperature probe source, as well as a record time stamp.
To access the Log History display option:
• Press
while in
Measure
mode. The “
Choose Display
Configuration
” message will be displayed in the Reminder
messages area.
• Press
. The instrument will display the log history
regarding the selected
Measure
mode.
Notes:
• When an alarm condition is active, the logged records
will have an exclamation mark “
!
”.
• If logged in Auto Hold, logged records will have an
“
H
”.
• If another
Measure
mode is selected, the Log History
will reset.
• If the temperature unit is changed, all logged temperature values will be automatically displayed
in the new temperature unit.
• “
A
” denotes automatic temperature compensation.
“
M
” denotes manual temperature compensation.
• Press
to access the zoom menu for Y axis. Use
or
for zooming Y (parameter)
axis.
• Press
to return to the main menu.
When the
off-line
graph
is displayed:
• Use the arrow keys to move along the X (Time) and Y (parameter) axes of the graph.
• Press
to access the zoom menu for X and Y axes. Use
, or
/
/
/
/
/
/
/
to switch between the active zooming
axes. Press
or
to zoom the selected axis.
Note
: While in zoom graph menu the
key is not accessible.
• Press
to return to the main menu.
The System Setup menu allows the user to customize the user interface, view meter information, set the
external serial communication interface and to restore the manufacturer settings.
Accessing System Setup
• Press
while in
Measure
mode.
• Press
. The system setup options will be displayed on
the LCD.
To access a System Setup option:
• Use
or
to highlight the desired option.
• Press
to access the selected option.
The following is a detailed description of the System Setup option screen:
Beeper
This option allows the user to turn an acoustic warning signal on
or off. This function can be used to signal 4 different events: a
stable signal, an alarm state, when every key is pressed or when
an incorrect key is pressed. Enable (or disable) the Beeper for
these events. Disabling the Beeper will stop audible signals.
w
w
w
.
.c
om
in
fo
rm
at
io
n@
itm
.c
om
1.
80
0.
56
1.
81
87
