background image

User’s Manual 

 

PLUG AND PLAY   

 

PLUG & PLAY DDC2B FEATURE 

 

This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. 
It allows the monitor to inform the host system of its identity and, depending on the level of DDC 
used, communicate additional information about its display capabilities. The DDC2B is a 
bidirectional data channel based on the I²C protocol. The host can request EDID information over the 
DDC2B channel. 
 

THIS MONITOR WILL APPEAR TO BE NON-FUNCTIONAL IF THERE IS NO VIDEO 
INPUT SIGNAL. IN ORDER FOR THIS MONITOR TO OPERATE PROPERLY, THERE 
MUST BE A VIDEO INPUT SIGNAL. 
 

This monitor meets the Green monitor standards as set by the Video Electronics Standards 
Association (VESA) and/or the United States Environmental Protection Agency (EPA) and The 
Swedish Confederation Employees (NUTEK). This feature is designed to conserve electrical energy 
by reducing power consumption when there is no video-input signal present. When there is no video 
input signal this monitor, following a time-out period, will automatically switch to power saving 
mode. This reduces the monitor's internal power supply consumption. After the video input signal is 
restored, full power is restored and the display is automatically redrawn. The appearance is similar to 
a "Screen Saver" feature except the display is completely off. The display is restored by pressing a 
key on the keyboard, or clicking the mouse.

 

16 

 

FACTORY RESET 

Select the 

FACTORY RESET

option to reset to the monitor’s 

default setting. This will erase the current settings. Enter the 
option and select On or Off. 

INFORMATION 

Display Horizontal frequency/Vertical frequency/Resolution 
information.  

 

 

 

 

 

 

 

 

 

 

Summary of Contents for JC199





















Reviews: