7
Engl
ish
2. First Use of HANNSpad
2.1 Managing and Charging the Battery
Before using the HANNSpad for the first time, fully charge the battery. HANNSpad has a built-in
polymer battery; use only the dedicated charger to charge the device.
In order to prolong the service life of the product, use the device until the battery is depleted before
the first two times of charging the battery.
To charge the battery, connect the charger / adapter to the device and the DC jack.
NOTE:
•
For the first two times of charging the battery, the charging time may take up to 10 hours; succeeding times
may take up to 5 hours.
•
During charging, the battery icon on the screen will scroll.
•
When charging is complete, the battery icon will turn green and stop scrolling.
•
When you plug in the charger after the product shuts down due to low power, it may take a while before the
product enters the home screen.
•
The Li-ion battery cells in the battery pack are not user-serviceable.
When the product is not in use, be sure to turn off the device.
If the device will not be used for a long time, be sure to discharge and then charge the battery once
a month.
The built-in polymer battery must be recharged regularly. Battery damage caused by depletion or
the use of unauthorized charger are not covered by the warranty.
2.2 Turning on/off HANNSpad
Press and hold the
button to turn on/off the HANNSpad. See Device Description.
