27
English
2.3 Using the TV
2.3.1
Turning the TV On and Off
1
Press
on the control panel or remote control. The power LED indicator on
the TV changes from amber to blue, indicating that the TV is on.
2
Press
again. The power LED changes from blue to amber, indicating that
the TV is off.
2.3.2
Switching Source Signals
Press
INPUT
on the control panel or remote control to select the incoming source
signal to set TV source for channel search. Press
OK
to confirm.
2.3.3
Performing an Automatic Channel Search
Before using the TV to view programs, you need to activate the channel search first.
1
Press
MENU
on the control panel or remote control, then select to enter the
Channel menu.
2
Select
Air/Cable
to set the signal source. (
Air
or
Cable
, default is
Cable
)
3
Select
Auto Scan
. Three options are available:
Scan all channels
,
Digital
channel only
, and
Analog channel only
.
• To search for digital channels only, select
Digital channel only
.
• To search for analog channels only, select
Analog channel only
.
• To search for both, select
Scan all channels
.
4
Press
on the remote control to run the channel search.
2.3.4
Selecting Channels
•
Press
CH
S
on the control panel or
on the remote control to increase the
channel number.
•
Press
CH
T
on the control panel or
on the remote control to decrease the
channel number.
•
Enter the specific channel number by pressing the number buttons on the
remote control.
CH
CH
Summary of Contents for ST19DMSB
Page 1: ......
