81
Troubleshooting
Situation
Solution
No picture and sound.
• Connect the power cord properly.
• Press the
POWER
button on the con-
trol panel or remote control.
• Press the
SOURCE
button to cycle
through connected video sources.
• Press the
CHANNEL UP
or
CHAN-
NEL DOWN
button
to switch to other
TV stations.
• Check the TV/CATV OSD settings.
See “TV/CATV” on page 65.
• Make sure all cables are connected
properly.
No picture, or poor picture,
sound is OK.
• Check the antenna and cable connec-
tions.
• Adjust the brightness in the OSD
menus. See “Brightness” on page 49.
Picture is not in color.
• Adjust the saturation in the OSD
menus. See “Saturation” on page 52.
Picture is OK, no sound.
• Press the
VOLUME UP
button on the
control panel or remote control.
• Make sure the MTS option is set to
MAIN.
One of the speakers has no
sound.
• Adjust the balance in the OSD
menus. See “Balance” on page 61.
Can’t receive some TV chan-
nels using cable TV.
• Try the Auto Program function in the
TV Settings menu. See “Auto Scan”
on page 67.
Want to reset TV settings.
• Use the Preset function in the OSD
Picture and Audio menu.
Troubleshooting
13
