7
User Instructions
Turn the left handle to obtain hot water, the right handle to obtain cold water.
If the flow of water diminishes over time, remove and clean the aerator.
Install the spout
Remove the plug from the spout tee.
Swing C only
: Install the deco-ring on the spout. Make
sure that the set screw hole in the deco ring lines up with
the set screw hole on the spout.
All models
: Push the spout sealing ring firmly into the
spout tee.
Press the spout over the spout tee. Install and tighten the
set screw with the enclosed 3 mm Allen wrench.
Turn on the water and check all connections for leaks.
