2
English
Technical Information
Recommended water pressure
15 - 75 PSI
Max. water pressure
145 PSI
Flow rate
2.2 GPM
Hole size in mounting surface
1³⁄₁₆"
Max. depth of mounting surface
1½"
Installation Considerations
• For best results, Hansgrohe recommends that
this unit be installed by a licensed, profes-
sional plumber.
• Please read over these instructions thoroughly
before beginning installation. Make sure that
you have all tools and supplies needed to
complete the installation.
This faucet is for use with cold
water only. Do not connect it to
the hot water supply.
• This faucet requires a ½" male nipple, extend-
ing ½" outside the surface of the finished wall.
• The wall must be reinforced at the mounting
point.
• Keep this booklet and the receipt (or other
proof of date and place of purchase) for
this product in a safe place. The receipt is
required should it be necessary to request
warranty parts.
10859xx0
39834xx0
16859xx0
25⁵⁄₁₆"
24¹¹⁄₁₆"
14⅛"
3½"
4⁹⁄₁₆"
2¾"
5¹¹⁄₁₆"
1⁹⁄₁₆"
6⁷⁄₁₆"
½"
NPT
26¹⁵⁄₁₆"
25"
14³⁄₁₆"
3⁹⁄₁₆"
2¾"
5⁹⁄₁₆"
½"
NPT
⅝"
4⅜"
26¹⁵⁄₁₆"
25"
14³⁄₁₆"
3⁹⁄₁₆"
2¾"
5⁹⁄₁₆"
½"
NPT
⅝"
4⅜"
