4
Technical Information
Recommended water pressure
15 - 75 PSI
Max. water pressure
145 PSI
Recommended hot water temp.
120° - 140° F*
Max. hot water temp
176°F*
Flow rate
1.5 GPM
Hole size in mounting surface
spray
1⅛"
valves
1¼"
pull rod
1¼"
Max. depth of mounting surface
1½"
English
*Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.
Installation Considerations
• For best results, Hansgrohe recommends that
this unit be installed by a licensed, profes-
sional plumber.
• Please read over these instructions thoroughly
before beginning installation. Make sure that
you have all tools and supplies needed to
complete the installation.
• Models 16808/16818xx1 require ½" hot
and cold supply lines (not included). Use
braided, flexible hoses.
Do not use soft
PEX hoses or rigid metal tubes.
• For correct function of the faucet, the hot
supply must be on the left and the cold supply
must be on the right.
• Keep this booklet and the receipt (or other
proof of date and place of purchase) for
this product in a safe place. The receipt is
required should it be necessary to request
warranty parts.
Installation
16510/16511/16803/16805
− See page 6
16808/16818
− See page 16
16808xx1
16818xx1
