English
WATERSENSE® is a registered mark of the U.S.
Environmental Protection Agency
Technical Information
Max. flow rate
.0 GPM
*Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.
Important
For best results, Hansgrohe recommends that
this unit be installed by a licensed, profes-
sional plumber.
Please read over these instructions thoroughly
before beginning installation. Make sure that
you have all tools and supplies needed to
complete the installation.
The use of enhanced water efficient
shower heads (restricting water flow
below 2.5 gpm @ 80 psi) may result
in unexpected temperature changes
that might startle – or could even
burn – the bather if the water supply
pressure changes. Water supply
pressure changes can occur due to
things like toilet flushing and washing
machine or dishwasher operation.
Install only with a compensating valve rated
for this shower head’s flow rate.
After installation, test the effect of adding
this shower head to your plumbing system.
While running your shower, activate each
water-demanding appliance in the home
(toilet, dishwasher, clothes washer, etc.) and
see if the use of those appliances causes the
temperature of the shower water to change
suddenly.
Confirm that the water coming from the
shower head does not exceed 10° F. If the
temperature of the water changes suddenly
or exceeds 10°F, contact Hansgrohe at 800
334 0455 before using the showerhead.
Keep this booklet and the receipt (or other
proof of date and place of purchase) for
this product in a safe place. The receipt is
required should it be necessary to request
warranty parts.
•
•
•
•
•
•
•
Raindance S 100 3-Jet
04341XX0
Raindance E 100 3-Jet
04344XX0
Raindance C 100 3-Jet
04345XX0
A11.18.1-005
CSA B15.1-005
A11.18.1-005
CSA B15.1-005
A11.18.1-005
CSA B15.1-005
