background image

The control (bu�on) has a light mode available. The first press 

bu�on to ac�vate the light, the second press of the bu�on deac�-

vates the light.

The bu�on is used for quick control of the massage jets. The force of the 

water flow can be adjusted by turning the nozzles to the le� or right. 

Thus, if water does not flow through the nozzle, it may not be a malfunc�on, 

the nozzle may just be closed. Not all nozzles can be regulated in this way. 

It is also possible to regulate the strength of  the massage when the massage 

motor is started by turning the suc�on valve air into the jets, which is located

on the top edge of the Hot Tub Wave.

The bu�on is used to switch on the filter pump, which is designed 

to purify the water.

The temperature in the Hot Tub Wave is controlled only by the stove that is 

connected. Regulate the temperature by adding fuel (wood, coal). It is important 

not to exceed a total temperature of 40 °C. Monitor the temperature with a suitable

thermometer that is immersed in the in water. We recommend our thermometer, 

where you can monitor the temperature via an app that sends no�fica�ons when 

the set temperature is reached.

Failure to maintain the required temperature may result in damage to the Hot Tub 

WAVE, such as pipework, etc. There is also a risk of scalding by too hot water. Take 

extra care when adding fuel to the stove.The surface of the stove may be hot and again, 

burn injuries may occur. Avoid contact with the stove or use protec�ve equipment 

when adding fuel and handling the stove (stove door, etc.) Failure to comply with 

the maximum se�ng temperature (40 °C) can be harmful to life and health. 

Check the temperature with a thermometer before each use. Never check the 

temperature with your hands, scalding may occur

6

Control system

4.2 

Temperature set up

https://eshop.hanscraft.cz/digitalni-bazenovy-teplomer-s-bluetooth-aplikaci

4.3 

Light

 

 

4.4  Bl

owe

r

 

 

LIGHT

The bu�on is used to switch on the light.

BLOWER

 

The bu�on is used to switch on the bubble massage.

MASSAGE         

 

 

FILTR ATION

The control (bu�on) has a bubble massage mode. The first press 

the bu�on to ac�vate the bubble massage, the second press bu�on

to deac�vate the bubble massage

Summary of Contents for HOT TUB WAVE













Reviews: