8
Control panel
5 .5 Temperature
The temperature is displayed in the center of the main screen. You can change the
setting with the arrow above and below the temperature. (see picture on the next page)
Set the filter cycles so that one works in the morning and the other in the afternoon, at
least two in the morning and two in the afternoon, depending on the water quality and
whirlpool capacity.
5 .4 Time
Setting the time is important for the whirlpool to function. From the main screen,
touch Settings. In the next selection, select the Time button. To adjust the values,
touch the hours and minutes when the value you just changed changes color. Use the
arrows on the right to adjust the marked value. After setting, press the confirmation
button between the arrows. Use the up and down arrows to easily change the hour,
minute, or 12/24 hour settings.
b) Filter cycle 2
Filter cycle 2 is off by default. If you want to turn it on, simply go to the line Filter Cycle 2
and set it in the same way as Filter Cycle 1.
Settings
Time
Time
00:00
Settings
Filter
Start
End
Duration
1
2
00:00 00:00
00:00 00:00
0 HR 0 Min
0 HR 0 Min
Filter
