HANSCRAFT SPATOUCH 3, User Manual

6

Installation of the hot tub/Audio system Aquatic

3 2  Filling the hot tub with water

Fill the hot tub with a sufficient amount of water. The level of water in the hot tub 
cannot ever fall under the skimmer level. If you notice a water leak, stop the water 
until the defect is fixed. Hot tubs do not possess the technology for water-softening 
and hard water can be damaging to them. The damages caused by poor handling and 
upkeep are not covered by the guarantee.
a)   Fill the hot tub through a skimmer to prevent an over aeration of the circulation 

pumps.

b)  Do not fill the hot tub with water of temperature over 104 °F.
c)   Once the water reaches the desired level, put the cartridge filter inside the 

skimmer. Tilt the filter during the installation to prevent air bubbles. Only after 
removing the air from the filter, install the filter into place.

3 3  Running the power supply of the hot tub

If the hot tub is connected by a moving supply cable, this cable cannot come in con-
tact with sharp objects or be exposed to external forces. Therefore we recommend 
putting the supply cable inside a protective case. Turn on a residual current device 
intended for a hot tub.

3 4   Programming of the hot tub control unit using the control 

panel

Now you can start the programming of the hot tub. The process is described in the 
chapter “Control panel”. After you are finish the programming, cover the hot tub with 
a thermo cover and let the water temperature to stabilize. Check the water level 
inside the hot tub regularly.

4  Aquatic AV audio system

Aquatic AV audio system AQUATIC/MY MUSIC (relevant only for hot tubs equipped 
with the system) 

If you want to play music from an external device, it is necessary to pair the device 
with the hot tub first (phone, tablet, computer). Turn on the bluetooth system on your 
external device and search for the AQUATIC device. The connection is not restricted by 
a code and only one connection can be active at a time. You can play music immediately 
after the devices are successfully paired. You can control all the functions of the audio 
system on your connected external device.