Care and maintenance
Page EN-30
Cleaning
1. Clean the ice cube container (35) as de-
scribed in section ‘Cleaning the ice cube
maker’ on page EN-31.
2. Wash the internal fixtures in warm water
with washing-up liquid and dry thoroughly.
3. Wipe down the inside with warm water
and washing-up liquid.
4. When wiping clean, add a few drops of
vinegar to the water to prevent mould
from forming.
5. Clean the door seal with clean water only.
It is sensitive to oil and grease.
6. Rub everything completely dry, including
the door seals, and allow to air briefly.
Using the appliance again
1. Re-insert the internal fittings.
2. Connect the mains plug to the socket or
switch on the fuse again.
3. To quickly cool the fridge and freezer,
switch on SUPER FRZ (‘Quick freezing’)
and SUPER REF (‘Quick refrigerating’) at
the same time (see page EN-18).
4. Place the frozen food back into the freez-
er once the freezer has reached a tem-
perature of –18 °C and switch off ‘Quick
refrigerating’ and ‘Quick freezing’.
5. Set the desired fridge and freezer temper-
ature (see page EN-15).
Cleaning the water tank
1. Remove the water tank (13) from the
holder. Hold it firmly at both sides. Push
it upwards firmly and towards yourself at
the same time.
(13)
(39)
(30)
2. Remove the lid (30) and the sealing
ring (39) of the water tank (13).
3. Wash the water tank (13), the lid (30) and
the sealing ring (39) with warm water.
Rinse thoroughly with clear water and al-
low the parts to dry completely.
4. Push the sealing ring (39) back onto the
outlet of the water tank.
5. Place the lid (30) back onto the water
tank (13). Make sure that the lid is clicked
in on both sides of the water tank.
Cleaning the valve of the wa-
ter dispenser
You will find the valve of the water dispenser
on the inside of the left fridge compartment
door when the water tank has been removed.
(41)
1. Lift the valve of the water dispenser a little
with the help of a thin, flat tool.
