Operation
Page GB-11
2. After selecting the heating method, set
the desired oven temperature using the
rotary switch (14). Temperature indicator
(13) shows the set value.
(14)
(13)
(16)
3. Press the button (16). The oven lighting
switches on and the oven starts to heat
up. The temperature indicator (13) blinks
until the set temperature is reached.
You can change the set temperature at any
time using the rotary switch (14). Then you
must press the button (16) again to con-
tinue operation.
The time indicator (12) displays a cooking
time of 9:00 hours.
(22)
(16) (12)
(11)
4. To change the cooking time, rotate
the function switch (22) and press the
button (16) at the same time.
The progress bar (11) shows the remain-
ing cooking time as a percentage with
eight bars. If only four bars are lit, half of
the cooking time has elapsed.
The built-in oven switches off automatically
and emits five beeps once the cooking time
has elapsed. The oven light goes out and
the display shows the time.
Extraction hood
WARNING
Risk of scalding!
Steam is generated through the build
up of heat within the device when
cooking dishes, and can cause scalding
when coming into contact with the skin.
This steam is discharged from the cook-
ing compartment through the extrac-
tion hood (2) between control panel
and oven door.
(2)
(8)
(7)
■
Make sure that you do not come into
contact with the hot steam coming
out of the extraction hood (2) during
operation.
■
When opening the oven door (7) do
not come into contact with the hot
steam expelled from the cooking
compartment.
CAUTION!
Risk of burns!
Elements, sides, baking trays, etc. get
very hot during operation. Accessible
parts may become hot.
■
Keep small children away.
■
Avoid direct contact.
■
Only touch oven door by the handle.
