Built-in oven 65M90D0-E11319G
GB-23
Operation
The timer (Automatic mode)
Using the timer, you can
– set a cooking time;
– set a timer for the end of a cooking pro-
cess;
– set a timer for the end of a cooking pro-
cess following a specific cooking time.
WARNING
Fire hazard!
There is an increased risk of fire in
timer mode!
Please ensure that you always ob-
serve the following when using the
timer:
• Before starting the timer, please
make sure to inform all members
of the household so that they do not
put anything flammable in the oven.
• Monitor the oven while using the
timer in order to prevent spills and
burning.
• Please note that fats, oils and al-
cohol can catch fire quickly when
heated.
• Please note that the oven is not
switched on or off by the alarm
function.
• Never leave the oven unattended
when grilling in timer mode!
Please note!
• You can pre-programme up to 23 hours and
59 minutes in advance. The cooking time
can be set between 1 minute and 10 hours.
• Any programming will be deleted in the
case of a power failure.
Setting a cooking time
1. Press the button
11
for approximately 3
seconds. The power indicator
17
will ap-
pear on the display.
2. Briefly press the button
11
again (several
times) until the indicator “
dvr
” appears on
the display.
3. Press the button
10
or
13
to enter setting
mode.
88 88
A
0 30
A
The “0” in the time setting “
0:30
” will flash, as
well as the
A
in the display.
4. Now use the buttons
10
and
13
to set the
number of hours for the desired cooking
time.
5. Press the button
11
again.
6. Now use the buttons
10
and
13
to set the
number of minutes for the desired cooking
time.
7. Use the left toggle switch
9
to set the desired
cooking or baking function, and the right tog-
gle switch
14
to set the desired temperature.
The cooking process will start. Following the
set cooking time, the appliance will automat-
ically switch to standby mode. An acoustic
signal will sound, and the indicator
A
will
flash.
Summary of Contents for 268 880
Page 72: ......
