Built-in oven 65M90D0-E11319G
GB-24
Operation
Setting an end time
1. Press the button
11
for approximately 3
seconds. The power indicator
17
will ap-
pear on the display.
2. Briefly press the button
11
again (several
times) until the indicator “
End
” appears on
the display.
3. Press the button
10
or
13
to enter setting
mode.
88 88
A
13 07
A
The number of hours for the current time will
flash, as well as the
A
indicator.
4. Now use the buttons
10
and
13
to set the
hour for the desired end time.
5. Press the button
11
again.
6. Now use the buttons
10
and
13
to set the
minute for the desired end time.
7. Use the left toggle switch
9
to set the desired
cooking or baking function, and the right
toggle switch
14
to set the desired temper-
ature. The cooking process will start. Once
the desired end time has been reached, the
appliance will automatically switch to standby
mode. An acoustic signal will sound, and the
indicator
A
will flash.
Setting a cooking and end time
1. Set the desired cooking time as described in
steps 1-6 under “Setting a cooking time”.
2. Then press the button
11
.
88 88
A
13 57
A
The display will show the current time; the
A
indicator will light up.
3. Briefly press the button
11
again several
times until the display shows the “
End
” indi-
cator.
4. Now set the desired end time as described in
steps 2-6 under “Setting an end time”.
5. Press the button
11
. The appliance will
switch to standby mode; the display will
show the current time, and the
A
indicator
will light up.
6. Use the left toggle switch
9
to set the desired
cooking or baking function, and the right tog-
gle switch
14
to set the desired temperature.
The appliance will automatically start at the
time that corresponds to the set end time mi-
nus the set cooking time. Once the set cook-
ing time has elapsed, it will automatically
switch to standby mode. An acoustic signal
will sound, and the indicator
A
will flash.
Example:
It is now 9:00 AM. You would like to have a dish
ready at 1:00 PM; it takes 45 minutes to cook.
• Follow steps 1-6 as described. At 12:15
PM, the appliance will automatically switch
on; at 1:00 PM, it will automatically return
to standby mode.
Summary of Contents for 268 880
Page 72: ......
