Built-in oven 65M90D0-E11319G
GB-27
General
4. Pull the door slightly towards you and then
guide it forwards out of its hinges from below.
Putting the oven door back on its
hinges
1. Hold the door on an angle using both hands.
21
22
2. Place the hinges
21
on both sides in the
openings
22
in the side walls.
3. Open the door completely.
4. Fold the clips
20
on both sides all the way
back again. You should now be able to close
the oven door so that it is level.
5. Close the oven door. If you hear a cracking
sound, the hinged clips
20
are not pressed
back far enough or the hinges
21
are tilted.
If this happens, remove the door from its
hinges and put it back on again.
Removing, cleaning and fitting
the glass panes
The oven door has three glass panes. You
should clean the panes and the gaps regularly.
Removing the glass panes
1. Pull the oven door off its hinges as described
in the section “Taking the door off and putting
it back on its hinges”.
2. Lay the oven door flat on an even surface. It
is best to lay a woollen blanket or towel un-
derneath to avoid scratching the outer pane.
3. Take the inner pane out of the holder as
shown.
4. Also take the middle pane out of the holder
as shown.
Summary of Contents for 268 880
Page 72: ......
