Operation
Page EN-11
Before getting started
– Read chapter “Safety” on page EN-5, in
particular the safety instructions.
– Set up and connect the appliance as de-
scribed in chapter “Start-up” on page EN-18.
Setting the temperature
CAUTION
Health hazard!
The appliance may not operate proper-
ly if the ambient temperature exceeds
or falls below the specifi ed temperature
range for a prolonged period. This can
then lead to an increase in temperature
inside the appliance.
■
Always ensure the prescribed ambi-
ent temperature is maintained (see
“Intended use” on page EN-5).
You can set the temperature with the help of
the temperature adjuster. The cooling pow-
er is variable and adjustable from “MIN” to
“MAX”. “MAX” is the lowest temperature.
The ideal temperature in the freezer com-
partment is –18 °C.At the prescribed ambient
temperature, the setting ‘MED’ will suffice if
you do not open the door too often and al-
ways close it correctly. Otherwise the ener-
gy consumption and the temperature in the
freezer may rise.
Operation
MED
MED
(1)
What you need to do
1. Insert the mains plug into an easily acces-
sible socket (220–240 V~/50 Hz 0,5 A).
The appliance is then switched on. The
compressor starts to work, the refrigerant
flows through the pipes and a quiet hum-
ming sound can be heard.
If the appliance is making unusual noises,
check that it is stable and remove any ob-
jects that may be on top of it.
Set the temperature controller to “MED”
. If the ambient temperature changes, adapt
the temperature setting, e.g. in the summer in
the direction “MAX”.
If you set a lower temperature, you
will need higher cooling performance.
This increases the energy consumption.
