Operating the oven
Page EN-13
Setting the time
You must set the time when using the oven
for the first time or after a power cut. The dis-
play shows
00:00
.
The time is displayed in 24-hour format.
1. Tap the sensor.
00
will flash on the hour indicator.
2. Turn the
< >
dial until the display shows
the current hour (
0
–
23
).
3. To save the setting, tap the sensor
again.
00
will flash on the minute indicator.
4. Turn the
< >
dial until the display shows
the current hour (
0
–
59
).
5. To save the setting, tap the sensor.
Switching the oven on/off
As soon as a power supply has been con-
nected, the oven will be in stand-by mode. In
order to switch
– on the oven, tap the sensor.
The display will show the current function
and the standard temperature.
– to stand-by mode, tap the sensor.
– off the oven, you must pull the mains plug
out of the socket or switch off the applica-
ble electric circuit.
Opening the oven door has no impact
on the oven’s operation. The oven will
continue to heat.
Selecting a function
Function describes the method of heating.
Your appliance’s functions can be found in
the table on Seite EN-14.
Further information on the individual settings
can be found in the
– section „Special features for some heating
methods“ auf Seite EN-17
– enclosed brochure “Baking, roasting and
cooking”.
You can select the function before and during
cooking:
• Turn the function dial F until the display
shows the corresponding symbol and its s
andard temperature.
Thermostat control
You can change the temperature before and
during cooking:
1. Tap the sensor.
2. Turn the temperature controller
< >
until
the display shows the desired temperature.
After a short time, the temperature will light
up permanently.
Summary of Contents for 30057346
Page 36: ......