Operation
Requirements for safe use
– You have read chapter "Safety" from page
EN-4 and understand all the safety notices.
– The appliance is set up and connected as
described in chapter "Start-up" from page
EN-18.
Switching the appliance on
and off
(1)
The temperature controller (1) is also used
to switch the appliance on and off. It is on
the right wall in the fridge compartment and
is continuously adjustable.
Switching on
1. Insert the mains plug into an easily acces-
sible socket (220–240 V~/50 Hz).
2. Set the temperature controller (1) to a set-
ting of between ‘1’ and ‘7’.
The appliance is then switched on. The
compressor starts to work, the refrigerant
flows through the pipes and a quiet hum-
ming sound can be heard. The interior
light will switch on as soon as the door is
opened and will switch off if the door is
closed.
3. If the appliance is making unusual noises,
check that it is stable and remove any ob-
jects that may be on top of it.
Operation
Switching off
1. Set the temperature controller (1) to ‘0’.
The compressor is switched off. The ap-
pliance doesn’t refrigerate. The interior
light continues to function.
2. To switch the appliance off completely,
pull out the mains plug.
3. If the appliance is switched off, leave the
door open slightly to avoid mould forma-
tion.
Setting the temperature
WARNING
Health hazard!
The appliance may not operate proper-
ly if exposed to low ambient tempera-
tures for extended periods of time. This
could then cause a rise in temperature
inside the refrigerated area.
■
Always ensure the prescribed ambi-
ent temperature is maintained (see
"Intended use" on page EN-4).
Set the temperature to +6 °C and fill the fridge
in such a way that the temperature conditions
inside are optimally utilised, guaranteeing op-
timal food storage.
A temperature setting that is too high or too
low can reduce the shelf life of your food. This
leads to greater food waste.
Use the temperature controller (1) to set the
temperature in the fridge.
• First select a medium setting.
• If, for example in summer, the ambient
temperature increases, so select a lower
setting accordingly.
To increase the cooling output in the fridge
– turn the temperature controller towards ‘7’.
– To decrease it, turn the temperature con-
troller towards ‘0’.
Operation
Page EN-11
Summary of Contents for 34291655
Page 30: ...Umweltschutz Seite DE 30 ...
Page 60: ......
