Changing the door hinges
Page EN-24
Depending on the space conditions, you can
change the direction of the door hinges on
your appliance. This work, however, requires
you to have a certain degree of craftsmanship
skills. Please read the following steps com-
pletely before commencing work.
In addition to the package contents, you will
need:
– a medium-sized slot screwdriver and Phil-
lips screwdriver;
– a size 8 and size 10 spanner;
– pliers.
1. Disconnect the mains plug from the socket.
(12)
2. Unscrew the screw (12). Then remove the
hinge fitting.
3. Unscrew the 3 screws on the upper hinge
and remove the hinge.
4. Open the upper door, take it out and set it
aside.
(13)
5. Move the cover panel (13) at the top of
the appliance to the opposite side.
(14)
6. Unscrew the middle hinge and remove
it. Pay attention to the plastic discs (14).
They must later be repositioned correctly
in the same place.
7. Open the lower door, take it out and set it
aside.
Changing the door hinges