HGS14355EW, HGS14355ES
HGS14355EW, HGS14355ES
Changing the door hinges
EN-12
Changing the door hinges
EN-12
4. Use flat-nose pliers to carefully pull the temperature con-
troller out of its holder. If necessary, put a cloth between the
temperature controller and the flat-nose pliers to prevent
scratches. Lever out the two sides of the cover on the front
slightly and lift the cover up.
MED
MAX
MIN
5. Unscrew the hinge plate’s three fixing screws and the two
individual screws on the opposite side. To do this, use an 8
mm spanner or a cross-head screwdriver. Remove the hinge
plate.
6. Screw the hinge plate as well as the two individual screws
back onto the respective opposite side.
Changing the door hinges
WARNING
Risk of electric shock!
To change the door hinges, you will need to re-
move the cover from the freezer. Live parts can
become accessible by doing so.
• Pull out the mains plug before starting to change
the door stop.
You can change the side which the door opens on. The door hinges
are on the right upon delivery. As this alteration requires some
manual skills, please read through the steps of the procedure be-
forehand. You need the following tools:
– Cross-head screwdriver
– 8 and 10 mm open-end wrench or socket wrench
– Flat-nose pliers
1. Pull out the blind plug from the top of the door.
2. Use a screwdriver to loosen both screw covers on the top of
the cover.
3. Unscrew the two screws (on the left and right) from the top of
the cover. To do this, use a cross-head screwdriver.
Summary of Contents for 39744140
Page 26: ...HGS14355EW HGS14355ES DE 26...
