Start-up
Page EN-23
Moving and unpacking
WARNING
Risk of suffocation!
■
Do not allow children to play with the
packaging fi lm. They may get caught
up in this or suffocate.
■
Prevent children from pulling small
parts from the device or taking them
out of the accessory bag and putting
them in their mouths.
CAUTION
Risk of injury!
Improper handling of the appliance
may result in injury.
■
The appliance is heavy and bulky. Ask
another person to help with moving
and installation.
■
Bases, drawers, doors, etc. must not
be used as steps or for support pur-
poses.
NOTICE
Risk of damage!
Improper handling of the appliance
may result in damage.
■
If possible, do not tilt the cooling ap-
pliance horizontally.
■
Allow the cooling unit to stand up-
right for 2 hours after transit.
■
Do not use sharp or pointed objects
to unpack it.
• Move the appliance using a transporting
trolley or with a second person.
• Unpack the appliance and carefully re-
move all packaging, plastic moulding,
adhesive strips, protective film and foam
padding from the inside, outside and back
of the appliance.
Choosing a suitable location
CAUTION
Dangers from the refrigerant!
■
Do not damage the refrigeration cir-
cuit, for example by piercing the re-
frigerant channels of the condensate
vaporiser with sharp objects, cutting
off the tubing, etc.
■
Refrigerant is fl ammable when spurt-
ing out and can damage the eyes. In
this case, rinse your eyes in clean wa-
ter and seek medical assistance im-
mediately.
■
To prevent a fl ammable gas-air mix-
ture from forming following a leak in
the refrigeration circuit, the installa-
tion space must have a minimum size
of 1 m³ per 8 g of refrigerant in com-
pliance with standard EN 378. The
amount of refrigerant contained in
your appliance can be found on the
type plate on your appliance.
NOTICE
Risk of damage!
The appliance may not operate proper-
ly if exposed to low ambient tempera-
tures for extended periods of time. This
can then lead to an increase in temper-
ature inside the appliance.
■
Make sure that the specifi ed ambient
temperature is maintained (see “In-
tended use” on page EN-5).
To prevent a flammable gas-air mixture from
forming following a leak in the refrigeration
circuit, the installation space must have a
minimum size of 1 m³ per 8 g of refrigerant
in compliance with standard EN 378. That
equates to a minimum space of 3.5 m³ for
this appliance.
Start-up
