Troubleshooting table
Page EN-27
Problem
Possible cause
Solutions, tips
Appliance
switches itself
off.
Brush/nozzle
blocked.
Actuate On/Off foot switch, pull
out mains plug, clean brush/
nozzle.
Motor protection
filter is blocked.
Overheat protection
has been activated.
Actuate On/Off foot switch, pull
out mains plug, leave appliance
to cool for at least 1/2 hour and
clean motor protection filter.
Telescopic tube
/ suction hose is
blocked.
Actuate On/Off foot switch,
pull out mains plug, check
telescopic tube and suction
hose for blockage, and clean if
necessary.
Suction force is
weak.
Dust bag is
not positioned
correctly.
Insert the dust bag correctly.
Dust bag is full.
Change the dust bag.
Brush / nozzle
is not positioned
correctly.
Position the brush / nozzle
correctly.
Object is plugging
the nozzle.
Actuate On/Off foot switch,
pull out mains plug, check
telescopic tube and suction
hose for blockage. Remove
object.
Filters are inserted
incorrectly or are
dirty.
Insert filters correctly and/or
clean.
Air by-pass vent is
open.
Close the air by-pass vent.
Summary of Contents for 504956
Page 34: ...Technische Daten ...
Page 66: ......