Start-up
Page EN-22
4. Make sure that the ambient temperatures
match the climate category of the appli-
ance (see “Intended use” on page EN-4).
– Suitable locations are dry, well-ventilat-
ed areas that are cool if possible.
– Unsuitable locations are ones with direct
sunlight or which are directly next to an
oven, hob or radiator.
5. If underfloor heating is installed at the set-
up location, place the cooling appliance
on an insulation plate made from solid
material.
6. Check the position of the appliance with a
spirit level.
(5)
7. Level out any unevenness on the ground
using both of the front screw feet (5).
8. Tilt the appliance backwards slightly and
screw/unscrew the screw feet (5).
9. Repeat the adjustment until the appliance
is upright and secure. The appliance
should not wobble when opening the
doors.
Cleaning before use
In order to remove the odour which is pres-
ent in all new appliances, wipe the fridge and
freezer out prior to first use with a solution
made from 100 ml vinegar and 200 ml water.
Then wipe it out with clean water and dry all
of the parts off afterwards.
Electrical connections
• Insert the mains plug into an easily ac-
cessible and properly installed socket
(220–240 V~ / 50 Hz).
You will find all important informa-
tion about operation from
page EN-11.
