HGS 14355A2, HGS 14355A2S
NOTICE
Risk of damage!
If your freezer has been transported horizontal for an
extended period, lubricant from the compressor may
have got into the refrigeration circuit.
• In such case leave the freezer standing in its normal
position for approx. 12 hours before you switch it on.
This allows the lubricant enough time to flow back
into the compressor.
1. Clean the freezer before switching-on for the first time. (See
chapter „Care and maintenance“, page 18.)
2. Connect the mains plug to a properly installed socket (220 V
to 240 V, 50 Hz, 10 A).
3. Open the door.
4. Turn the temperature controller
1
to ‘MAX’. The compressor
starts to work after a short time, the refrigerant flows through
the pipes and a quiet humming can be heard.
5. If the freezer makes strange noises, please check whether it is
firmly placed. If necessary, remove any items from the freezer.
6. You can put frozen food in the freezer as soon as it reaches
approx. -18°C on the inside. Check the temperature with a
fridge/freezer thermometer.
Starting up the freezer
14
Operation
13. Screw the hinge plate tightly back onto the opposite side.
Make sure that the hinge pin is in the hinge bushing of the
door. The door will now function properly again.
14. Screw both adjusting feet securely back onto the freezer.
15. Carefully stand the freezer upright.
16. Reinsert the blind plug on the opposite side of the door.
You have successfully changed the door hinges.
Starting up the freezer
