Additional functions
Page EN-27
Additional functions
Quick pre-heating
The oven offers an additional function in or-
der to speed up the pre-heating process (ex-
ceptions: Functions ,
,
and ).
(9)
(1)
• Select a function and a temperature, as
described above, and tap the
sen-
sor (9).
The pre-heating symbol will also appear in
the display. The oven will begin to heat.
When the pre-set temperature has been
reached, you will hear one
one signal tone
tone.
Setting the cooking time
You can select a cooking time of up to
9 hours.
The cooking time can be set in the range of
– up to 30 minutes in 1 minute steps.
– from 30 minutes in 5 minute steps.
(5)
(2)
(7)
(1)
1. Select a function and a temperature, as
described above.
2. Tap the
sensor (5).
On the left, next to the temperature, the
display will flash ‘
00:00 hr
’.
3. Select the desired cooking time with the
+/– sensors or the slider (7).
After a short time, the cooking time will light
up permanently.
4. Start the oven’s operation with the sen-
sor (2).
Once the pre-set cooking time has elapsed,
you will hear five signal tones and the dis-
play will show
End
. The oven will switch
into standby mode.
The cooking time can be changed at
any time. The change will take eff ect
approx. 6 seconds after the last sensor
operation.
To end the cooking process early, switch the
oven off with the
g
sensor(13).
Setting the end of the cooking
time
If you want your cooked food to be ready at
a certain time, you must set the end of the
cooking time and the cooking duration.
Requirements:
– The time is set correctly.
– You have set the cooking time (see the pre-
vious section, steps 1 to 3.).
(13)
(10)
(1)
1. First, tap the sensor (13) to exit other
functions.
2. Tap the sensor (10).
The symbol will appear on the display
and the hour indicator will flash.
Summary of Contents for 6467 5200
Page 42: ...Technische Daten Seite DE 42 ...
Page 84: ......
