Page EN-20
Fitting and installation
– Your built-in furniture may need to be mod-
ified. If you do not have the manual skills to
do this, you should hire a professional.
– Veneers or plastic coverings on the built-
in furniture require heat-resistant adhesive
(100 °C). If the adhesive and surfaces are
not heat-resistant, the covering may warp
and come loose.
– An intermediate shelf is required if a drawer
is to be installed below the oven.
– The installation recess must have the fol-
lowing minimum dimensions:
Installation under a worktop
Installation in an upright cabinet
min. 570
max. 50
560
35
585
All dimensions in mm
Connecting the oven
Depending on the installation recess, the oven
must be connected before or after installation.
– For the electrical connection of the oven, a
professional must install an earthed power
socket with a separate fuse with sufficient
protection (230 V~/50 Hz/16 A).
– The socket must be installed in way that
does not affect the depth of the installation
recess when the oven is plugged in.
– Do not use multi-plugs or extension cables.
1. Switch off the socket for the Oven before
installation. To do this, unscrew and/or
switch off the fuse for the socket.
2. Set all oven switches to zero.
3. Insert the mains plug into the socket.
Summary of Contents for 65M40M1-E1131A
Page 30: ...Technische Daten Seite DE 30...
