Page EN-24
The timer (Automatic mode)
88 88
A
14 45
A
The display will now show the current
time as well as the status indicator (17)
and the timer indicator (18)
.
When the specified time runs out, an au-
dible signal will sound and the timer indi-
cator (18) will flash.
Following the set time, the appliance
will
not
automatically switch to stand-
by mode. To put it into standby mode,
press the buttons (11) and (13)
simulta-
neously
for approximately 3 seconds.
Deleting programmed settings
• To delete the cooking duration and/or end
time setting, press the buttons (11) and
(13)
simultaneously
for approximately
3 seconds.
Pausing the programme
• To pause a running programme (cooking
duration, end time), press the (11) and
(13) buttons
simultaneously
for ap-
proximately 3 seconds.
Pausing the acoustic signal
The acoustic signal you will hear at the end
of a set cooking time normally lasts approxi-
mately 2 minutes. You can pause this acous-
tic signal at any time:
• Briefly press any button (for fewer than
3 seconds).
