Installation and connection
Page EN-31
CAUTION
Risk of injury!
■
The appliance is heavy and bulky. Get
another person to help with moving
and installation.
Fire hazard!
Improper handling of the oven may
result in damage or cause a fire. Heat
trapped inside the appliance may short-
en its service life.
■
Ensure sufficient ventilation. Do not
cover the vents, for example with
oven mitts or cookery books!
■
When installing the appliance, follow
the dimension specifications for ven-
tilation.
NOTICE
Risk of damage!
Improper handling of the appliance
may result in damage.
■
Do not use sharp objects to unpack
the appliance.
■
Do not use the cooking compartment
door and door handle as a step or for
lifting.
Moving and unpacking
• Move the appliance using a trolley or with
the help of a second person.
• Carefully unpack the appliance and re-
move all packaging, plastic moulding, ad-
hesive strips and foam padding from the
inside, outside and back of the appliance.
Installation and connection
Installing the oven
The oven is designed for installation in
standard kitchen units. It can be installed at
eye-level and underneath the worktop.
The following conditions must be observed:
– Do not install the oven directly next to a
refrigerator or freezer. This will increase its
energy consumption unnecessarily due to
heat emission.
– The best place is next to the sink. You have
an additional work surface and dirty dishes
can be washed immediately.
– Before installation, check whether the ap-
pliance dimensions are compatible with
your furniture dimensions.
– In respect of fire protection, the oven con-
forms to Type Y (EC 335-2-6). This type
of appliance may only be installed on one
side of taller kitchen cabinets, appliances
or walls.
– Your built-in furniture may need to be mod-
ified. If you do not have the manual skills
to do this, you should hire a professional.