Page EN-18
The clock
The clock
Your oven is equipped with an electronic clock
that can also be used as a timer to switch the
oven on and off.
Quickly set the clock. If you do not touch
a button for 5 seconds, the operation
shall be cancelled. If this happens, start again
from the beginning.
Setting the time
When starting up the appliance for the first
time or after a power failure, the display will
show
0:00
. The time must be set.
cc
88:88
888
(10)
(13)
(9)
1. Tap the
sensor (9).
00
will flash on the hour indicator.
2. Turn the temperature controller (13) until
the display (10) shows the current hour
(
0
–
23
).
3. To save the setting, tap the
sensor (9)
again.
00
will flash on the minute indicator.
4. Turn the temperature controller (13) until
the display (10) shows the current minute
(
0
–
59
).
5. To save the setting, tap the
sensor (9).
The time is set.
If you want to change the time already
set, for example, changing from day-
light savings time to standard time, proceed
in the same manner.
Setting the start time
CAUTION
Fire hazard!
■
Before starting the timer, please
make sure you inform all members
of the household so that they do not
put anything in the oven.
■
Never leave anything to grill unat-
tended when using the timer!
■
Monitor the oven while using the
timer in order to prevent spilling and
burning. Please note that fats, oils
and alcohol can catch on fi re when
heated.
If you don’t want the cooking process to be
started immediately, but at a certain time, you
can set a start time, with the exception of:
Functions and .
Requirement: The time is set.
Please observe the following points when us-
ing the timer:
– You can pre-programme up to 23 hours
and 59 minutes in advance. The cooking
time can be set between 1 minute and 9
hours.
– An audible alarm will sound when a pro-
gramme has ended. You can cancel this
using one of the sensor button.
– A power failure will delete all programmes.
Summary of Contents for 65M90E3-E11B200
Page 36: ......
