HKS 14355GA1, HKS 14355GA1S
Changing the door hinges
13
Preparation
Changing the door hinges
WARNING
Risk of electric shock!
To change the door hinges you will need to remove
the cover from the appliance. Live parts can become
accessible by doing so.
• Pull out the mains plug before starting to change the
door stop.
You can change the side which the door opens on. The door hinges
are on the right upon delivery. As this alteration requires some
manual skills, please read through the steps of the procedure be-
forehand. You need the following tools:
– Cross-head screwdriver
– 8 and 10 mm open-end wrench or socket wrench
1. Pull out the blind plug from the top of the door.
2. Loosen both screw covers on the top of the cover using a
screwdriver.
3. Unscrew the two screws (on the left and right) from the top of
the cover. To do this, use a cross-head screwdriver.
4. Lever out the two sides of the cover on the front slightly and
lift the cover up.
5. Unscrew the three fixing screws for the hinge plate and the
two screws on the opposite side. To do this, use an 8 mm
spanner or a cross-head screwdriver.
Remove the hinge plate.
6. Screw the hinge plate as well as the two screws back onto
the respective opposite side.
Summary of Contents for 740913
Page 60: ......